Sports Floor Polyurea Coatings Mainly used in occasions with high wear resistance and scratch resistance requirements. It has high hardness and very good wear resistance.
Two-component coating cured with aspartic ester resin and isocyanate.
Normal temperature curing, 0-35 ℃.
Floor Paint Finish.
Quick drying, short opening time, good weather resistance, excellent scratch resistance.
Main agent 20kg curing agent 10kg ratio 2:1
Range of use
Mainly used in occasions with high wear resistance and scratch resistance requirements. It has high hardness and very good wear resistance. It also has good weather and color retention properties. It is suitable for indoor and outdoor parking lots, indoor decoration floors and heavy load industrial sites. The 0°C environment still cures quickly. It contains solvents, indoor use must evaluate environmental hazards.
Material base data（25℃，60%RH）
Colored viscous liquid
Colorless transparent liquid
Large stimulating odor
Ester ester slight odor
Mixed material Data（25℃，60%RH）
Viscosity of mixed 25℃: 800MPaS
Mixing proportion 25℃:1.2
Potlife 25℃: 30min
Dry time: 60min
Hard drying time: 4hr
Operation time and temperature relation
Material physical properties after curing
Paint film appearance
Wear (CS17 wheel 750g,500 turn)
Acid resistance, 10% sulfuric acid
No discoloration, no foaming
Alkali resistance, 20% sodium hydroxide
Slight discoloration without foaming
Construction prohibited when humidity is greater than 85%RH;
The curing agent component meets the water vapor extremely easily to deteriorate, saves must seal dry.
The material table dries quickly，and it is necessary to pay attention to the color difference that may occur at the joint.
Curing agent=2:1, coating weight 0.15-0.2kg/m2, adding 5-10% polyurea diluent on site；
Medium-duty drum roller coating construction；
Curing fast, 4hr can walk, can be used normally after 2 days.
Storage: Ideal storage conditions is 5-35 ℃ in cool and dry place, avoid sun exposure.